3 Way Scraper
*Heavy duty chrome plated steel construction
*Positive Stops in three positions
*Closes fully for extra protection
*Use with standard single edge blades
* Colors may vary (silver or gold)
Warning:
Wear ANSI approved safety goggles when working with tools and equipment
To insert a blade or replace a blade: Unscrew the screw holding the blade cover and remove the cover and screw. Set the blade in place making sure that the notches in the side of the blade fit over the nubs on the blade back support. Replace the blade cover and screw.
The Scraper handle is three-way adjustable. Push down on teh spring loaded handle left or right and release the lock pin in the new handle position. Make sure the lock pin is tightly engaged in one of the three possible positions.
When using, always be alert of the sharp blade.
Do not allow children to use this scraper. When not in use, store in a safe location that is out of reach of children.
*Heavy duty chrome plated steel construction
*Positive Stops in three positions
*Closes fully for extra protection
*Use with standard single edge blades
* Colors may vary (silver or gold)
Warning:
Wear ANSI approved safety goggles when working with tools and equipment
To insert a blade or replace a blade: Unscrew the screw holding the blade cover and remove the cover and screw. Set the blade in place making sure that the notches in the side of the blade fit over the nubs on the blade back support. Replace the blade cover and screw.
The Scraper handle is three-way adjustable. Push down on teh spring loaded handle left or right and release the lock pin in the new handle position. Make sure the lock pin is tightly engaged in one of the three possible positions.
When using, always be alert of the sharp blade.
Do not allow children to use this scraper. When not in use, store in a safe location that is out of reach of children.
*Heavy duty chrome plated steel construction
*Positive Stops in three positions
*Closes fully for extra protection
*Use with standard single edge blades
* Colors may vary (silver or gold)
Warning:
Wear ANSI approved safety goggles when working with tools and equipment
To insert a blade or replace a blade: Unscrew the screw holding the blade cover and remove the cover and screw. Set the blade in place making sure that the notches in the side of the blade fit over the nubs on the blade back support. Replace the blade cover and screw.
The Scraper handle is three-way adjustable. Push down on teh spring loaded handle left or right and release the lock pin in the new handle position. Make sure the lock pin is tightly engaged in one of the three possible positions.
When using, always be alert of the sharp blade.
Do not allow children to use this scraper. When not in use, store in a safe location that is out of reach of children.
